Uniden XSR917/918 - Manual (Page 29)

RA
DIO
Page 21
To set the Alarm/Buzzer ON, move slide switch to or position.
The position is for Buzzer and the icon shows on the display.
The position is for Alarm and the icon shows on the display.
Once turned on the Alarm/Buzzer will trigger once the current time matches the
Alarm/Buzzer time.
The Alarm (radio) will activate using the radio station frequency used last.
The volume of the Alarm depends on the radio volume set (see Using Your Radio
- Volume & Frequency, page 19)
The Buzzer volume is constant.
The Alarm will activate for 10 minutes and the Buzzer will activate for 5 minutes.
After this time they will deactivate and the set mode will continue.
To turn off the Alarm or Buzzer, move slide switch to 'on' or 'off' position.
If slide switch is moved to or position then activation will change to the
selected setting and the activation time (5 or 10 minutes) will restart.
When
alarm/buzzer
activates only the
(Snooze), (find
handset) and
slide sw are
usable.
SETTING THE ALARM/BUZZER ON
TURNING THE ALARM/BUZZER OFF