Uniden UBC396T - Manual (Page 114)

112
Search and Close Call Options
Setting the Delay Time
Srch/CloCall Opt
Set Delay Time
This setting determines how long the scanner waits
after a transmission ends before resuming quick
search or Close Call operation. Select your setting,
then press the scroll control.
Off The scanner resumes immediately when the
transmission ends.
1 -5 sec The scanner waits the set amount of time
after the transmission ends before resuming.
Note: The default setting is 2 sec.
Setting the Search Frequency Step
Srch/CloCall Opt
Set Step
This setting selects the frequency step used for setting
the channels. Select your setting, then press the scroll
control.
Auto The step is based on the band (see the table at
the front of the manual)
5.0 kHz , 6.25kHz, 7.5 kHz, 8.33kHz, 10.0 kHz,
12.5 kHz , 15.0 kHz, 20.0 kHz, 25.0 kHz,
50.0 kHz , 100.0 kHz The scanner uses the
selected step.
Note: The scanner defaults to Auto.
Menu
Menu