Setting channel lockout – Uniden UBC396T User Manual
Page 93
91
Programming/Editing Optional Settings
Select the channel
Set Attenuator
This setting controls whether the scanner attenuates
signals on this channel. Select your setting, then press E.
On
- the channel is attenuated by about 18 dB.
Off
- the channel is not attenuated.
Notes:
• The default setting is Off.
• For trunked systems, the attenuation is a system-
level setting.
• You can also toggle this setting by holding on the
channel and pressing
and E.
Setting Channel Lockout
Program System
E
Select the system
E
Edit Group
E
Select the group
E
Edit Channel
Select the channel
Set Lockout
This setting determines whether the scanner will scan
this channel when its system and group are enabled.
Select your setting, then press E.
Lockout
- the channel is not scanned.
Unlocked
- the channel is scanned.
Notes:
Func
Menu