Mixed model appliances, Archiver and recorder functionality – VBrick Systems VB5000 User Manual

Page 10

Advertising
background image

2

© 2009 VBrick Systems, Inc.

Video encoding rates configurable from 8 Kbps to 15 Mbps.

Transport and Elementary stream support.

Optional – video camera with pan, tilt and zoom.

Optional – 19 in. rack mount adapter (holds two across).

Table 1. VBSSM Models †

† See the VBrick Appliance Getting Started Guide for VBSSM rear panel drawings.

Mixed Model Appliances

In addition to dual devices (for example two encoders, or an MPEG-2 encoder and MPEG-2
decoder), VBrick supports mixed model appliances (for example a WM encoder and an
MPEG-4 encoder). VBrick appliance v4.1 software supports almost any combination of
VBrick devices in Slots 1 and 2 so you can mix and match as necessary. For example, you can
have a WM encoder in Slot1 and an MPEG-4 encoder in Slot2, or you can have an MPEG-2
encoder in Slot1 and MPEG-4 decoder in Slot2. The only exception is that you cannot have a
WM encoder and an MPEG-4 decoder in the same appliance.
In general, encoders are installed in
Slot1; decoders are installed in Slot2. WM encoders, if present, are always installed in Slot1.

Archiver and Recorder Functionality

Archiver/Recorder functionality may be different in mixed model appliances depending on
how the slots are populated. In other words, the behavior of the device in a given slot may
change depending on what combination of appliances are installed. See Figure 1 below and
note the following distinctions:

An archiver only records from an associated encoder. For example, a WM Archiver is
associated with a specific WM encoder.

A recorder is not associated with any encoder. It independently records one stream at a
time from an encoder, a decoder, or from the network.

On MPEG-4 appliances, there is no archiving or recording.

Model

Configuration

Description

9170-4200-000x

VBSSM-MP2

Ruggedized single channel MPEG-2 encoder.

9171-4200-000x

VBSSM-MP4

Ruggedized single channel MPEG-4 encoder with
audio. Same enclosure as VBSSM-MP2.

9172-4400-000x

VBSSM-MP2/4

MPEG-2 or MPEG-4. This device has a different
enclosure with a single video input that supports
two channels. It also supports RS-422 passthrough.
VBSSM-MP2 does not.

9174-4200-000x

VBSSM-MP4

No audio.

9175-4200-000x

VBSSM-MP4

With audio.

Note VBrick WM, MPEG-2, and MPEG-4 appliances all run the same codebase. The

configurable options and user interface vary according to the type of appliance (e.g.
MPEG-2, MPEG-4, etc.) on which the code is installed.

Advertising
This manual is related to the following products: