VBrick Systems VB5000 - Manual (Page 57)

MPEG-2 Configuration
VBrick MPEG-2 Appliance Admin Guide 49
benefit of collecting log information from several VBricks simultaneously. When logging
externally, specify either the IP address or hostname a server that is configured to receive
SNMP traps on port 162 into the Remote Event Log IP Address or Remove Event Log DNS
Host Name fields.
Log Time Zone Specifies the time zone (Local or GMT) that is used for logged events.
Trap Log Local If Enabled, displays trap events in the local log.
Trap Log Remote If Enabled, sends trap event notices to a remote host.
General Config
Log Local If Enabled, displays configuration changes in the local log.
General Config
Log Remote If Enabled, sends configuration change notices to a remote host.
IR or Script Config
Log Local If Enabled, displays IR or script-generated configuration changes in
the local log.
IR or Script Config
Log Remote If Enabled, sends IR or script-generated configuration changes to a
remote host.
Remote Event Log
Host Type Identify remote event log server by host name.
Remote Event Log
IP Address Identify remote event log server by IP address.
Remote Event Log
DNS Host Name Host name of remote event log server.