Vivotek FD7131 - Manual (Page 60)

- 59 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
Maintenance
Five actions can be selected.
“Reboot system” Click the reboot button to restart system.
“Restore” Click it to restore all setting to factory default except setting in “Network
type” in network page.
“Factory default” Click on Factory default button on the configuration page to restore
the factory default settings. Any changes made so far will be lost and the system will be
reset to the initial factory settings. The system will restart and require the installer
program to set up the network again.
“Upgrade firmware” Select the firmware file and click upgrade button.