Vivotek PT3112/3122 - Manual (Page 14)

- 13 -
“Digital Output” Click on the “On” or “Off” button can turn the Digital output to on or
off status.
“Client Settings” Click on the button would link to client setting pages, please check
the following session for more details.
“Configuration” Only administrator can access camera configurations.
Direction buttons The buttons contain: Left, Right, Up, Down and Home function. The
home button would command camera to the center of the camera.
“Go to” Once the administrator set the preset positions, users can move the camera to
the positions through this control.
“Pan speed” This button can set the moving range of “Left” and “Right” commands.
“Tilt speed” This button can set the moving range of “Up” and “Down” commands.
“Auto Pan” This button would command the camera to pan from the current position
to the most left or most right, than to the opposite position. After reaching both vertical
end position, the camera would stop at the same position as the one before pan.
“Stop” The button stops the “Auto Pan” command or “Auto Patrol” command.
“Auto Patrol” This button would command the camera to patrol between the preset
positions in the patrol list that can be set on the “Camera control page”. After one
patrol cycle, the camera would stop at the same position as the one before the patrol.
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097