Vivotek PT3112/3122 - Manual (Page 44)

- 43 -
Viewing system log
Click the link on the configuration page to view the system log file. The content of the
file reveals useful information about configuration and connection after the system
boots up.
Viewing system parameters
Click the link on the configuration page to quickly view the whole system parameter set.
The content is the same as CONFIG.INI.
Restore factory default settings
Click the link on the configuration page to restore the factory default settings. This
means any changes made before will be lost and the system will be reset to the initial
status when shipped from the factory. After confirmation, the system will restart and
require the installer program to setup the network.
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097