Remote controller – Vivotek PT3112/3122 User Manual
Page 43
- 42 -
Remote controller
PT3112, PT3122 provide a remote controller to command the pan/tilt command of the
camera. The direction control part provides the function as the main web page.
And the Pan/Patrol/Stop functions are also the same as the main web page.
Direction control
area
Auto movement
control area
“Auto Patrol” This button would command the camera to patrol between the preset
positions in the patrol list that can be set on the “Camera control page”. After one
patrol cycle, the camera would stop at the same position as the one before the patrol.
“Auto Pan” This button would command the camera to pan from the current position
to the most left or most right, than to the opposite position. After reaching both vertical
end position, the camera would stop at the same position as the one before pan.
“Center” This button would calibrate the camera position to the center position as the
camera boots up.
“Stop” This button would stop the auto movement of the camera.
www.vivotek.com
T:
886-2-22404099
F:
886-2-22404097