Setup menu – Vizio XVT472SV User Manual
Page 43
VIZIO XVT472SV User Manual
Version 12/1/2009
43
www.VIZIO.com
Channel Info
Channel Info displays the technical information of the channel including channel number, frequency,
modulation type, status, SNR (signal noise ratio), and signal strength.
Setup Menu
1. Press
MENU on the remote control and the Picture menu will be shown on the screen.
2. Press
▲
or
▼
on the remote control to highlight the Setup menu, and then press OK to select it.
3. Press
▲
or
▼
on the remote control to select Setup menu option.
4. Once the menu option is highlighted, press ◄ or ► on the remote control to adjust the setting.
5. Press
MENU once to return to the previous screen or repeatedly to return to your program if the task
has been completed.
Language
Select to change the Language of the OSD. The default is English. You can
also select Español or Français.
PIP
Your TV features PIP mode so you can watch two pictures at the same time.
One picture is displayed as the full screen (main screen) and the other picture
is displayed in a small window (sub screen).
Note:
PIP is only available when the Rating Enable option in the Parental
Controls Menu is OFF.
To select the options in the PIP sub-menu, press OK. A new menu will be
displayed showing the following PIP settings:
PIP Mode
Select from Off, PIP or POP (Picture-outside picture). In PIP mode a smaller sub-screen is
displayed on top of the main screen. In POP mode the main screen and sub-screen are of equal
size and are positioned side-by-side.