VTech DS3111-3 - Manual (Page 19)

www.vtechphones.com 16
Telephone settings
A single pause
(approximately
three seconds)
is automatically
programmed
between the
access number
and the password
when you
program your
VOICEMAIL
button so that
your voicemail
service will
recognize your
password.
Depending on
your voicemail
service, you
may need to
program an extra
pause between
the access
number and your
password.
•
Voicemail setup
To program a pause:
Press MENU/SELECT when the handset is not in use.
Press or to select VOICEMAIL SETUP, then press MENU/SELECT twice.
The blinking cursor should be at the end of your access number. Press and hold
the REDIAL/PAUSE button until a P appears.
Press MENU/SELECT. You will hear a confirmation tone.
To reset all codes to the default ones:
Press MENU/SELECT when the handset is not in use.
Press or to select VOICEMAIL SETUP, then press MENU/SELECT.
Press or to select RESET ALL CODES, then press MENU/SELECT.
The screen displays RESET CODES?
Press MENU/SELECT. You will hear a confirmation tone.
1.
2.
3.
4.
1.
2.
3.
4.
5.