Vizio SV420XVT1A User Manual
Page 15
VIZIO SV420XVT1A User Manual
Version 6/2/2008
15
www.VIZIO.com
When CABLE is selected and the code to match your Cable (or Satellite) Box has been entered,
this button will operate the Cable (or Satellite) Box the same as this button on your Cable (or
Satellite) Remote. When TV is selected, this button activates Picture-in-Picture mode.
When CABLE is selected and the code to match your Cable (or
Satellite) Box has been entered, this button will operate the Cable
(or Satellite) Box the same as this button on your Cable Remote.
When TV is selected, press this button to select the size of the PIP screen
from one of the following: small, medium or large
When CABLE is selected and the code to match your Cable Box
(or Satellite) has been entered, this button will operate the Cable
Box (or Satellite) the same as this button on your Cable Remote (or
Satellite). When TV is selected, press the button to choose the PIP input.
Note: The TV must be in PIP mode for this button to be functional.
When CABLE is selected and the code to match your Cable Box (or
Satellite) has been entered, this button will operate the Cable Box
(or Satellite) the same as this button on your Cable Remote (or
Satellite). When TV is selected, this button is used to select the channels
within the PIP screen when DTV/TV is the PIP input selected
This button cycles through the available screen formats. The options
are Zoom, Panoramic, Normal and Wide.
Press this button to “Freeze-Frame” the current screen. Press this
button again to continue playing.
This button will select the MTS options of Stereo, SAP or Mono in
standard TV mode and alternate audio channels, where available, in
DTV mode.
While in PIP/POP mode; pressing SWAP will switch the displays
from the main screen to the sub-screen or vice versa.
Use this button to change the picture mode from Custom, Standard,
Movie and Game
This button displays the image and system information display.
Press this button to switch the audio from the main screen to the
sub-screen while in PIP or POP mode.
This button will select the Closed Caption mode. The options are
OFF, CC1, CC2, CC3, and CC4 and if Digital Cable Service is the
signal; you would get Service1 through Service6, depending on your local
company.
This button selects a programmed DVD player.
This button selects a programmed Audio Receiver/Amp/Home
Theater System.
This button selects a programmed cable TV set-top box or a satellite
TV set-top box.
This button has been pre-programmed to select the codes to operate the VIZIO HDTV.