Vizio SV420XVT1A - Manual (Page 58)

VIZIO SV420XVT1A User Manual
Version 6/2/2008 58
www.VIZIO.com
4.5.5
Input Naming
This feature has been added to facilitate you, the user in identifying or
label the input and signal which is being watched. You could use up to 8
characters; either letters or numbers or combinations of both.
Press ▼ button to highlight this option.
Press ► button to obtain the next screen which shows the different
inputs.
Press ▼ button to select the desired
input which you want to label or name
(Examples: VCR, DVD,.., etc.) it with
any name which will make easier for
you to recognize it.
Press the key to go to the first
space (_) in the bracket.
Press either the ▲ or ▼ button and
select either the letter or number
belongs to this place.
Press the
► button to go to the next space (_) and again
Using either the ▲ or ▼ button select the second character of the name
given to this Input.
Repeat the last previous two steps until the name of the input is
completed.
Press the key to accept the name of the input or the EXIT key to
cancel the setting. .
Press the MENU key when you have finished to go to the previous
menu.
Since you are already in this feature; it is recommendable to name all
the Inputs which are being used as well as these for which you have an
idea what their name is going to be.
Once the adjustments are completed press the EXIT button to exit the
OSD completely.