Vizio SV420XVT1A User Manual
Page 33
VIZIO SV420XVT1A User Manual
Version 6/2/2008
33
www.VIZIO.com
Press the
button on the
remote to go to the next screen.
b. The Channel Scan screen will be
displayed; default choice is Scan.
Press the
button on the
remote control to commence the
search for available channels to be
stored into memory.
If you do not want to scan for channels at this time, press the
▼
button on the remote to
highlight Skip Scan and then press the button.
Note: If you select Skip Scan, next time that you
decide to complete this procedure; you will need to
select the TV as input and then go through the
Menu option to select the Tuner setup to get the
option of scanning the channels again.
c. The screen will now change to show the progress of the search for Analog (NTSC) and
Digital (ATSC) channels.
Note: DTV digital broadcast is not available in all areas. Refer to
to get
information about availability in your area, type of antenna and in which direction to point your
antenna. The channel availability through cable depends upon which channels your cable
operator supplies in Clear QAM; consult your cable operator for more information.