Veo ICA-500 - Manual (Page 12)

ICA-500 User’s Manual
12/80
5. Default HTTP Port1 number is 80.
6. ‘Submit’ it.
After Submit, the IP information of this ICA-500 will be updated.
Install the ICA-500 with an ADSL Router
If the ICA-500 was installed on the LAN with an ADSL router, then the ICA-500 can get a
dynamic IP address from the DHCP server. However, if the ICA-500 wants to be access
from the WAN, the ICA-500 IP address needs to be setup as fixed IP, also the Virtual
Server function of ADSL router needs to be setup as follows:
1. Setup the ICA-500 as Fixed IP, such as 192.168.0.20.
2. Enter the administrator page of ADSL router.
3. Enter the Virtual Server Page.
a. Setup the mapping of HTTP Port (80) to 192.168.0.20.
b. Restart the ADSL router.
Then the ICA-500 can be access from WAN by the ADSL WAN IP Address.
First time using the ICA-500
The ICA-500 web page communicates with the ICA-500 using an ActiveX control. The
ActiveX control must be downloaded from the ICA-500 and installed on your PC. Your
Internet Explorer security settings must allow for the web page to work correctly. To use
the ICA-500, user must setup his IE browser as follows:
From your IE browse è ”Tools” è ”Internet Options…” è ”Security” è”Custom
Level…”, please setup your “Settings” as follow.
Set the first 3 items
• Download the signed ActiveX controls
• Download the unsigned ActiveX controls
• Initialize and script the ActiveX controls not masked as safe To Prompt