Veo ICA-500 - Manual (Page 41)

ICA-500 User’s Manual
41/80
Get Time from a NTP server:
Select “NTP” Button
Key in the NTP server’s IP address.
Press “SAVE” to activate it.
After the ICA-500 gets the time from NTP server, it will update the ICA-500’s time
field.
Popup
:
Setup event message while motion or sensors has been activated
When any one of alarms enabled, and one of them detected, then a message window
will be displayed on the screen.
You can have output message in case of events activated such as sensors or motion
detection to warn user.