VTech ia5829 - Manual (Page 24)

21
Additional Information
Headset Operation
Your ia 5829 handset is equipped with a 2.5mm headset jack for use with an
optional accessory headset for handsfree operation. If you choose to use the
headset option, you must obtain an optional accessory headset, which is
compatible with the ia 5829.
To purchase a headset, visit us on the web at www. vtechphones.com or
call VTech Customer Service at 1-800-595-9511.
Once you have a compatible 2.5mm headset, locate the headset jack on the
ia 5829 handset. Connect the plug on the headset cord to the jack (under a
small rubber flap) on the cordless handset. The plug should fit securely. Do
not force the connection.
NOTE:
Whenever a compatible headset is
connected to the cordless handset, the
microphone on the handset will be muted.
This is done to limit the effect of background
noise.
Belt Clip
The ia 5829 is also equipped with a
detachable belt clip. Align the pins on the
inside edge of the clip with the notches on
the sides of the handset. The belt clip
should snap securely into place. Do not
force the connection.