VTech ia5847 - Manual (Page 17)

www.vtechphones.com 
Check for dal tone
After the batteries are charged, pick up the handset and press TALK/FLASH; you should hear a dial
tone. If you do not, refer to the Troubleshootng section in the back of this user’s manual.
Charge the handset battery
The battery may have enough power to allow for short calls. If the battery power is low, NEEDS
RECHARGING will appear on the handset screen. For best performance charge the battery for at
least 16 hours the first time.
Handset rnger style/battery save
You can select from four different handset ringer styles, or turn the ringer off and extend the
battery life.
1. With the handset in idle (off) mode, press PROG.
2. Press or until the screen displays RINGER: and the current setting.
3. Press SELECT. The current setting blinks, and you will hear a sample of the ring.
4. Press or to select RINGER: 1, 2, 3, 4 or OFF. You will hear a sample of each ring tone.
5. Press SELECT to choose the displayed ringer setting.
Set rnger volume
You can select from two different handset ringer volume, or turn the ringer off.
1. Begin with the handset in idle (off) mode.
2. Press and hold or until the screen displays OFF LOW HIGH.
3. The current setting blinks, and you will hear a sample of the ring volume.
4. Press or to select ringer volume: OFF/LOW/HIGH. You will hear a sample of each ring tone.
5. Press SELECT to choose the displayed ringer setting.
Telephone operaton