Troubleshootng – VTech ia5847 User Manual

Page 40

Advertising
background image

www.vtechphones.com



Add
tonal
nformat

on

Troubleshootng

Problem

Suggeston

There is noise

or interference

during a

telephone

conversation.

My calls fade out

or cut in and out

when I am using

the cordless

handset.

• The handset may be out of range. Move it closer to the telephone base.

• Appliances or other cordless telephones plugged into the same circuit as the telephone base can

cause interference. Try moving the appliance or telephone base to another outlet.

• Other electronic products can cause interference to your cordless telephone. Try installing your

telephone as far away as possible from the following electronic devices: wireless routers, radios, radio

towers, pager towers, cellular telephones, digital telephones, intercoms, room monitors, televisions,

VCRs, personal computers, kitchen appliances, and other cordless telephones.

• Microwave ovens operate on the same frequency as your telephone. It is normal to experience static

on your telephone while the microwave oven is operating. Do not install this telephone in the same

outlet or near a microwave oven.

• If your telephone is plugged in with a modem or a surge protector, plug the telephone (or modem/surge

protector) into a different location. If this solves the problem, re-locate your telephone or modem

farther apart from each other, or use a different surge protector.

• The layout of your home or office might be limiting the operating range. Try moving the base to

another location, preferably a higher location for better reception.

• Disconnect the telephone base from the modular jack and plug in a corded telephone. If calls are still

not clear, the problem is probably in the wiring or local service. Contact your local service company

(charges may apply).

• Select channels 4 through 10 for your router (refer to the user’s manual of your router for more

information).

• If you still have problems with the telephone or the router, make sure the handset is

ON and press

CHAN until the performance improves.

• Press the

CHAN button while on a call until the interference has been eliminated.

• If the other telephones in your home are having the same problem, the problem is in the wiring or

local service. Contact the local telephone company (charges may apply).

Advertising