VTech ia5847 - Manual (Page 26)

www.vtechphones.com 
B
as
c
o
pe
ra
to
n
Speed dal
6. When you finish entering the name, press SELECT or PROG. The screen displays ENTER
NUMBER.
7. Enter the telephone number. Press then press CHAN/REMOVE to backspace and make
corrections. Press REDIAL/PAUSE to store pauses in the dialing sequence.
-OR-
Press REDIAL/ PAUSE to display the last number dialed from this phone.
8. Press SELECT or PROG to store your entry. The screen displays DISTINCT RING? and the
current setting.
9. Press or to change the setting. Choose Y (for yes) if you wish the phone to alert you to calls
from this number by changing to a distinctive ringing pattern after the first ring. Choose N for a
normal ringing pattern.
10. Press SELECT or PROG to confirm your selection. If you chose Y, a will be displayed with the
speed dial entry.
Edt a speed dal entry
1. Press and hold the memory location key (1 through 9) of the entry you wish to edit.
2. When the screen displays the entry you want to edit, press
SELECT. Then press or until
EDIT flashes.
3. Press SELECT. The screen displays the name and number. The cursor appears at the beginning
of the name. Use , and the dial pad keys to edit the name. Press SELECT to move on to edit the
number. Use then press CHAN/REMOVE to backspace and make corrections. Press SELECT
to move to edit the distinctive ring setting.
4. Press SELECT to save the edited information.
SPEED EDIT ERASE
8005959511
01