Vivotek IP7152 - Manual (Page 101)

- 100 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
adddeny Add a set of deny IP address range to server. Start
and end parameters must be specified. If the index
parameter is specified, it will try to add starting
from index position.
deleteallow Remove a set of allow IP address range from
server. If start and end parameters are specified, it
will try to remove the matched IP address. If index
is specified, it will try to remove the address from
given index position. [start, end] parameters have
higher priority then the [index] parameter.
deletedeny Remove a set of deny IP address range from
server. If start and end parameters are specified, it
will try to remove the matched IP address. If index
is specified, it will try to remove the address from
given index position. [start, end] parameters have
higher priority then the [index] parameter.
start <ip address> The start IP address to add or to delete.
end <ip address> The end IP address to add or to delete.
index <value> The start position to add or to delete.
return <return page> Redirect to the page <return page> after the
parameter is assigned. The <return page> can be
a full URL path or relative path according the the
current path. If you omit this parameter, it will
redirect to an empty page.
RTSP SDP
Note: This request requires viewer access privilege
Method: GET/POST
Syntax:
http://<servername>/viewer/<0~(n-1)>/<network_accessname_<0~(m-1)>>
rtsp://<servername>/<0~(n-1)>/<network_accessname_<0~(m-1)>>