Vivotek IP7152 - Manual (Page 52)

- 51 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
Custom command
The network camera provides five more custom commands other than general pan, tilt,
zoom and preset functions. Users can click on “Custom commands” and refer to the
instruction manual of the attached device to setup frequently used functions.
Please note that if “Custom camera” is selected as PTZ driver, user must configure the
custom pan, tilt, zoom, and focus functions via “Custom Command” page.
1. Select Custom
camera
2. Left click on “Custom
Command”
3. Configure the PTZF functions