VBrick Systems ETHERNETV V4.4.3 - Manual (Page 112)

100 © 2009 VBrick Systems, Inc.
10. Check
Show physical stores
check box.
11. Click the plus sign (+) next to
Trusted Root Certificate Authorities
.
12. Select
Local Computer
and click
OK
.
13. Click
Next
and
Finish
when done.
Resolving Other Security Alerts
If you are receiving any other Security Alerts you will need to identify the problem as either
"out of date" or
The name on the security certificate is invalid.
If the certificate has an invalid
name, follow the steps below to determine the valid name. If the certificate has an "out of
date" error, a new certificate must be created.
T To determine the valid certificate name
1. Click
View Certificate
.
2. The
General
tab shows who the Certificate is issued to; the address shown is the address
that will need to be used in the browser address bar, as well as in the configuration of the
LDAP Server.
For example: if the information is
edirldap.vb.loc
then the address bar should read
https:/
/edirldap.vb.loc:636
and the LDAP Path should read
LDAP://edirldap.vb.loc:636
To find
out if the address is accessible, ping the address given in a command prompt. If the address is
not accessible you must create or add a DNS entry to the Host file on the local server or
generate a new certificate with the correct information.
Use RSA Authentication
EtherneTV Portal Server v4.3 or higher supports RSA authentication.