Vizio VL260M - Manual (Page 13)

VIZIO VL260M User Manual
Version 5/29/2009 13
www.VIZIO.com
VIZIO Remote Control
GUIDE – This button displays program information.
POWER ( ) – Press this button to turn the TV on from the
Standby mode. Press it again to return to the Standby mode.
TV – Press this button to select TV.
AV – Press this button to select the AV (either Composite or S-
Video) input.
COMP – Press the button to select the Component input.
HDMI – Press this button to select the HDMI input. By pressing it
repeatedly you will go through all HDMI inputs in sequence.
MENU – Use this button for the On-Screen Display (OSD) menu.
Press the button to select a feature after it has been highlighted.
!"# $
-These buttons are used to navigate the OSD menu.
They are used as value settings when the slide bar is shown on the
screen and option settings to turn a feature off or on.
MUTE – This button turns the sound on and off.
LAST – This button recalls the previously viewed channel. If the On-
Screen Display (OSD) menu is being used, this button will allow you
to get back to previous menu screen or out to your program when
you press it repeatedly.
VOL !/" – This button turns the volume up or down.
CH !/" – This button turns the channels up or down.
NUMBER BUTTON PAD – Use these buttons to select a channel or
enter a password.
INPUT –Repeatedly pressing this button will step you through the
input sources in the following sequence: TV, AV, Component, RGB,
HDMI1, and HDMI2. The sequence will then be repeated.
- (DASH) – When selecting a digital channel directly, use this button
for the separation of main and sub-channels. For example, channel
28-2 would be selected by the button sequence 2 8 DASH 2.