Vizio VL260M User Manual
Page 26
VIZIO VL260M User Manual
26
www.VIZIO.com
Note:
At this point, if a set-top box from your cable or satellite service company is being used; please
press the LAST button on the remote control and skip this section. Otherwise continue with next step:
h. The Tuner screen will be
displayed. If you are using Cable
Service (with no box), press
"
on
the remote control to choose
CABLE.
i. Press MENU on the remote to go
to the next screen. The Channel
Scan screen will be displayed;
default choice is Scan.
j. Press MENU on the remote
control to commence the search
for available channels to be stored
into memory.
k. If you do not want to scan for
channels at this time, press
"
on
the remote to highlight Skip Scan
and then press MENU. The
screen will now change to show
the progress of the search for
Analog (NTSC) and Digital
(ATSC) channels.
Note:
If you select Skip Scan, you can scan
channels at a later time by selecting the TV input,
then going to the Menu and selecting the Auto
Search option in the TV menu.
Note: DTV digital broadcast is not available in all
areas. Refer to
www.antennaweb.org
to get
information about availability in your area, type of
antenna and in which direction to point your
antenna. The channel availability through cable
depends upon which channels your cable operator
supplies in Clear QAM; consult your cable
operator for more information.
l. When finished, the Complete
screen will be displayed to inform
you that the HDTV has completed
the Initial Setup. Press # on the
remote control to exit and begin
watching TV.