Vizio VL260M User Manual
Page 33
VIZIO VL260M User Manual
Version 5/29/2009
33
www.VIZIO.com
Advanced Video
Press the
"
button to highlight the option for Advanced Video selection and press either the # button to
select it. A new menu will be displayed showing the advanced functions available for fine tuning of the
picture.
Noise Reduction
This feature diminishes picture artifacts caused by the digitizing of image motion content that may
be present in the picture. Choose from the Off, Low, Medium, or Strong setting.
Color Enhancement
This feature increases the picture reproduction performance of the
picture by reducing oversaturation of certain colors and improving flesh
tones. Choose from Off, Normal, Rich Color, Green/Flesh, and
Green/Blue setting.
Advanced Adaptive Luma
Large areas of brightness in the picture will result in a higher Average
Picture Level (APL) and the overall picture will look too light. This
feature will lower the APL to counteract this effect. Choose from Off,
Low, Medium, Strong, or Extend.
Backlight Control
Set this feature to OFF, DCR, or OPC. DCR (Dynamic Contrast Ratio)
improves the black level performance and increases contrast ratio.
OPC (Optimum Power Control) Reduces power consumption while
maintaining the same picture brightness.
Color Temperature
Color Temperature is the “warmness” or “coolness” of the white areas of the picture. Choose from
Normal, Custom, Cool, or Computer. Normal is the setting for television broadcasting. Custom
allows you to set a preset calibrated for a white point to suit individual preferences. Cool produces
a blue-hued image. The Computer setting sets the white point at the established setting for a PC
display (9300K). Each preset may also be adjusted for a customized setting.
Film Mode
Choose from Auto or Off. When set to Auto, the TV will detect the cadence (for example at 24
frames/second for film, or normal video at 60 fps). When set to Off it will stay at 60 fps.
Reset Picture Mode
Press the
"
button to highlight the option for Reset Picture Mode selection
Press # button to return on Picture settings to factory default.
A screen will come up to confirm your selection or to cancel it.
Press either $ or # to make the selection.
Press MENU to accept it.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
Note:
Only settings under the pictures adjustment will be reset.