Turtle Beach Audio Advantage Amigo TBS-1121-01 - Manual (Page 10)

www.Turtle-Beach.com
Page 6
Connectors and Controls
Feature Function
Status Light The status light indicates the following conditions:
GREEN: The light will remain on when the unit is powered on. The light will flash
when audio is playing, or when the audio driver is being used by a program.
RED: The light will turn Red when the audio output is muted (see below).
Volume/Mute
Control This control adjusts the master volume when pushed up or down. To mute the
output, push in the control. The status light will turn RED when mute is activated.
S/PDIF &
Headphone/ Line
Out Jack This jack operates in two modes:
Line/Headphones Output: The analog line-level output can drive external line-
level recording devices, powered speakers or stereo headphones.
S/PDIF Output: When the included optical adapter is inserted into this jack, it
becomes an optical S/PDIF output for playing digital audio. This allows for pass-
through of Dolby
® Digital and DTS® multi-channel DVD sound to external A/V
receivers or digital speaker systems.
Settings for the S/PDIF functions are in the Amigo Control Panel Speakers Tab.
Microphone Input
This jack accepts an external mono microphone. Power for an electret microphone
is provided on the ring of the jack. When a microphone plug is inserted into the
jack, the internal microphone is disabled.
A gain boost is accessible from the Mixer tab by clicking the “…” button under the
Mic volume slider and placing a check in the “Microphone Boost” option.
Internal
Microphone The internal microphone operates in the same manner as an external microphone.
Mic level and boost is accessible in the Amigo Control Panel Mixer Tab.
The internal microphone is disabled when a microphone plug is inserted into the
microphone input.
Minimum System Requirements
Processor Pentium 800 MHz / compatible or higher with one available USB port.
RAM 128 MB System RAM
Hard Drive Approximately 100 MB free space is required during the driver / application
installation process.
Display 1024x768 High Color (24-bit)
Operating Systems Windows® 2000, XP, XP64, Vista (32 bit only)
CD-ROM Drive CD-ROM or DVD-ROM drive required for software installation.
Speakers Powered speakers or headphones.
A digital speaker system or home theater A/V receiver with optical TOSLINK
inputs is necessary for connecting Amigo’s optical digital output.