Turtle Beach Audio Advantage Amigo TBS-1121-01 - Manual (Page 30)

www.Turtle-Beach.com
Page 26
Effects Tab
Speaker Position
The Speaker Position section lets you change the position of the speakers by clicking and
moving the blue “virtual speaker” icons in the illustration. The buttons function as follows:
Enable: The speaker positioning effect is enabled by clicking on this button.
Rotate: Clicking either of these two buttons will cause the virtual speaker positions to move
in a clockwise or counterclockwise rotation, with a rotation speed set by the slider. Click the
Manual button to stop the rotation.
Manual: Clicking this button allows you to move the virtual speaker positions manually by
clicking and dragging the blue speaker icons to different positions.
Random: Clicking this button allows you to move the virtual speaker positions in a random
mode with the speed set by the Rotate speed slider.
Reset: Clicking this button sets the virtual speakers back to their default position.
Environments
Environments are variations of reverberation settings, which enhance normal stereo by
creating a deeper surround sound field.
Enable: The Environments and Delay effects are enabled by clicking this button.
Environments Pull-Down Menu: Click to select from a list of different Environments
settings, each with their own characteristic reverberation tones.
Environment Size: These three buttons, labeled S (Small), M (Medium) and L (Large) each
set a different depth of the environment effect selected from the pull-down menu.