How to remove the top panel, How to change the fader unit, Line input jack(line4) – Vestax PCV-275 User Manual
Page 6: Mic input jack(mic1,2), Mic level, Mic equalizer(hi,low), Effect switch, Cue switch
LINE 4 IN
MIC
OFF
POST
ON
OFF
EFFECT
CUE
L
R
MAX
MIN
MIC-1
MIC-1
MIC-2
MAX
MIN
MIC-2
+16dB
-16dB
+16dB
-16dB
HI
LO
EQ
9
10
11
12
13
14
5
Top panel
Driver
Main panel
HOW TO REMOVE THE TOP PANEL
1
Remove each fader knobs and 10 screws which
fix the top panel.
2
Remove the top panel.
HOW TO CHANGE THE FADER UNIT
1
Remove the screws on the fader panel.
2
Remove the fader unit from position in mixer.
3
Carefully remove the multi-cable connector from
fader unit.
4
Attach multi-cable connector
to new fader unit.
5
Position the fader unit
carefully and secure
with screws.
9
LINE INPUT JACK(LINE4)
Input connectors for line level equipment such as CD players,tape decks
,DATs, or MDs etc.
10
MIC INPUT JACK(MIC1,2)
Input jacks of mic1, mic2.
11
MIC LEVEL
Adjusts the input level from all of the microphone inputs.
12
MIC EQUALIZER(HI,LOW)
Adjusts the HI and LOW frequencies for all of the microphone input.
13
EFFECT SWITCH
Used when sending signal to the external effect processor connected to the
effect SEND/RETURN.
14
CUE SWITCH
Used to send the signal from the mic channel to the monitor section for
headphone monitoring.
HOW TO CHANGE THE FADER UNIT
MICROPHONE, SUB INPUT SECTION
Driver