VTech i 6773 - Manual (Page 33)

30
Headset Operation
Your i 6773 handset is equipped with a 2.5mm headset jack for use with an optional
accessory headset for handsfree operation. If you choose to use the headset option,
you must obtain an optional accessory headset, which is compatible with the i 6773.
To purchase a headset, visit us on the web at www.vtechphones.com or call
VTech Customer Service at 1-800-595-9511.
Once you have a compatible 2.5mm headset, locate the headset jack on the i 6773
handset. Connect the plug on the headset cord to the jack (under a small rubber flap)
on the cordless handset. The plug should fit securely. Do not force the connection.
NOTE:
Whenever a compatible headset is connected
to the cordless handset, the microphone on the
handset will be muted. This is done to limit the
effect of background noise.
When a compatible headset is connected to the
handset, your speakerphone feature will be
disabled. To use your speakerphone feature,
simply disconnect the headset from the handset.
Belt Clip
The i 6773 is also equipped with a detachable
belt clip. Align the pins on the inside edge of
the clip with the notches on the sides of the
handset. The belt clip should snap securely into
place. Do not force the connection.
Advanced Operation