Vivotek IP7139 - Manual (Page 105)

IP filtering
Note: This request requires administrator access privilege
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/ipfilter.cgi?
method=<value>&[start=<ipaddress>&end=<ipaddress>][&index=<value>]
[&return=<return page>]
PARAMETER VALUE DESCRIPTION
addallow Add a set of allow IP address range to server. Start
and end parameters must be specified. If the index
parameter is specified, it will try to add starting
from index position.
adddeny Add a set of deny IP address range to server. Start
and end parameters must be specified. If the index
parameter is specified, it will try to add starting
from index position.
deleteallow Remove a set of allow IP address range from
server. If start and end parameters are specified, it
will try to remove the matched IP address. If index
is specified, it will try to remove the address from
given index position. [start, end] parameters have
higher priority then the [index] parameter.
Method
deletedeny Remove a set of deny IP address range from
server. If start and end parameters are specified, it
will try to remove the matched IP address. If index
is specified, it will try to remove the address from
given index position. [start, end] parameters have
higher priority then the [index] parameter.
104 - User's Manual
VIVOTEK - A Leading Provider of Multimedia Communication Solutions