Vivotek IP7139 - Manual (Page 94)

- 84 -
www.vivotek.com
(get/set)
name string[40] 6/6 The identification of this entry
enable 0, 1 6/6 To enable or disable this event.
priority 0, 1, 2 6/6 Indicate the priority of this event.
“0” indicates low priority.
“1” indicates normal priority.
“2” indicates high priority.
delay 1~999 6/6 Delay seconds before detect next
event.
trigger boot,
di,
motion,
seq,
6/6 Indicate the trigger condition.
“boot” indicates system boot.
“di” indicates digital input.
“motion” indicates video motion
detection.
“seq” indicates periodic condition.
di <integer> 6/6 Indicate which di detected.
This field is required when trigger
condition is “di”.
One bit represents one digital input.
The LSB indicates DI 0.
mdwin <integer> 6/6 Indicate which motion detection
windows detected.
This field is required when trigger
condition is “md”.
One bit represents one window.
The LSB indicates the 1 st window.
For example, to detect the 1 st and 3 rd
windows, set mdwin as 5.
inter 1~999 6/6 Interval of period snapshot in minute.
This field is used when trigger
condition is “seq”.
User's Manual - 93
VIVOTEK - A Leading Provider of Multimedia Communication Solutions