Vivotek IP7139 - Manual (Page 65)

64 - User's Manual
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
"CF Settings" Loading a CF card to the Network Camera allows you to save
snapshots and video clips to it. To ensure that the card is ready to record, it is
suggested that the CF card is formatted at initial usage.
To format the CF card:
1 : Insert a CF card in the Network Camera.
2 : Click Format CF card
The following message is displayed when the card is successfully formatted.
To remove the CF card:
1 : Make sure there is no data transmission between the Network Camera
and the CF card.
2 : Click Unload CF card and pull out the CF card from the Network Camera.
To test if the CF card can be applied to an event setting, follow the steps below:
1 : Select Application from the main menu.
2 : Click Add for Event Settings.
3 : Scroll down to Action and select the CF option
4 : Click CF Test to see if the card is working correctly.
The following message is displayed when the card is successfully detected.
For more information on how to save snapshots and video clips to the CF card
when an event is triggered, please refer to the Application section.