VTech GiGA5.8x VT5886 - Manual (Page 26)

26
Your
VT5801
cordless Handset is equipped with a 2.5mm Headset Jack for
use with an optional accessory Headset for hands-free operation. If you choose
to use the Headset option, you must obtain an optional accessory Headset,
which is compatible with the
VT5801.
To purchase a Headset, call VTech Customer Service at 852-2776 3223.
Once you have a compatible 2.5mm Headset, locate the Headset Jack on the
Handset. Connect the plug on the Headset cord to the jack(covered with a
small rubber flap) on the cordless Handset.
The plug should fit securely. Do not force the
connection.
NOTE :
Whenever a compatible Headset is connected
to the cordless Handset, the microphone on the
Handset will be muted. This is done to limit the
effect of background noise.
Many compatible Headsets have a reversible,
monaural design. You can wear your Headset
on either ear, leaving one ear free for room
conversation.
Belt Clip
The VT5801 is also equipped with a detachable
belt clip. Align the pins on the inside edge of
the clip with the notches on the sides of the
Handset. The belt clip should snap securely
into place. Do not force the connection.
Headset Accessories
Additional Information
91-5628-10-00_5801 HK En manualBackup.p65 2/17/2004, 12:08 PM 26