Additional information – VTech GiGA5.8x VT5886 User Manual
Page 29
29
Your Handset vibrates or shakes when a call comes in
•
It is likely that your Vibrating Handset Ringer option has been set to
ON
.
If you’d like to turn it off, see
Sounds & Alerts - Ringer CONTROL
.
You Hear Other Calls While Using Your Phone
•
Disconnect your Base Unit from the telephone jack, and plug in a regular
telephone. If you still hear other calls, the problem is probably in your
wiring or local service. Call your local telephone company.
You Hear Noise In The Handset, And None Of The Keys Or Buttons Work
•
Make sure the power cord is plugged in.
Common Cure For Electronic Equipment
If the unit does not seem to be responding normally, then try putting the
Handset in the cradle. If it does not seem to respond, do the following (in the
order listed) :
1.
Disconnect the power to the Base.
2.
Disconnect the Handset battery, and spare battery pack, if applicable.
3.
Wait a few minutes.
4.
Connect power to the Base.
5.
Re-install the battery pack(s).
6.
Watch for Handset to display :
In Case Of Difficulty
then
Additional Information
91-5628-10-00_5801 HK En manualBackup.p65
2/17/2004, 12:08 PM
29