VTech GiGA5.8x VT5886 - Manual (Page 9)

9
Handset Number Indicator
• Indicates the Handset number. It's permanently displayed at the top left
corner after the Handset has found the Base.
Searching for Base Indicator
• Indicates that the Handset is still searching for the Base.
Intercom Indicator
• On steady with the extension numbers currently on an intercom call. For
example, 02 indicates that the Base and Handset 2 are on intercom call.
Hold indicator
• On steady when the line is on hold.
Mute indicator
• On steady when the Handset microphone is muted.
Ringer Off indicator
• is displayed when the ringer is turned off.
Battery indicator
• When the Handset is removed from the charger, this lets you know the
level of charge in the battery pack, from FULL ( ) to EMPTY ( ).
• Cycles (Low, Medium, and Full) when Handset battery is charging.
• Flashes when a low battery condition is detected.
Answering Machine Indicator
• Indicates that the answering machine is answering an incoming call
Note: This is only applicable to the Handset registered with intergrated Base
Answering Machine.
Icon
Handset Icons
H
M
1 2 3
4 5 6
Handset Indicators
Description
Basic Operation
Line In Use Indicator
• On steady with one or more numbers next to it, indicating which extensions
are using the line. For example, 12 indicates that Handset 1 and
Handset 2 are on an outside call.
• Appears in idle or phone on modes to indicate a parallel set in use. It
replaces phone on icon during phone on mode and parallel set is detected.
91-5628-10-00_5801 HK En manualBackup.p65 2/17/2004, 12:08 PM 9