VBrick Systems ETHERNETV 4410-0118-0009 - Manual (Page 171)

Amino Set Top Box
ETV Portal Server Admin Guide 159
Setting the TV Display Format
As noted, you can change the
TV Display Format
from the
Preferences
menu. The following
tables show the output from normal and widescreen TVs depending on how the
TV Display
Format
is set. Be sure to power cycle the STB to implement any changes you make.
Table 18. Video Output with a Normal (4:3) TV
Table 19. Video Output with a Widescreen (16:9) TV
TV Display Format Video Output
Standard (4:3) Mode Normal (4:3) video plays normally and 16:9 video has the left and
right sides cropped off (center cutout).
Letterbox Mode Normal (4:3) video plays normally and 16:9 video has all the
picture viewable with black bars on the top and bottom
(letterbox).
Widescreen TV Normal (4:3) video plays normally and 16:9 video displays all the
picture but it is squashed in.
TV Display Format Video Output
Widescreen TV 16:9 video plays normally and 4:3 video has black bars left and
right (pillar box). This relies on the TV responding to aspect ratio
switching signals on VBI line 23 (PAL only). On TVs that don't
respond to this signal, you must set the TV aspect ratio manually
to avoid a stretched or squashed picture.