VBrick Systems ETHERNETV 4410-0118-0009 - Manual (Page 57)

Global Settings
ETV Portal Server Admin Guide 45
Advanced Settings
Advanced settings are enabled if you select a VBrick encoder or a VBStar. Note that the Portal
Server will attempt to retrieve and autofill the Multicast IP addresses and Port numbers. You can
modify these fields as necessary.
Progressive Download
Server Check this box to enable a WM encoder (with v4.2.1 or higher
software) with a hard drive (a VBStar) as a progressive
download server. All .wmv files stored in the
D:\public folder
of the VBStar will be available in the Asset Library for
progressive download. (You can also use a file server for
progressive download. See Adding File Servers on page 37.)
Allow Content Publishing All WM recordings will be published to the VOD servers and to
this VBStar if the user has access rights and publishing
permissions. Note that ingestions to the VBStar will fail when
the 60 GB hard drive is full.
Note The following values are stored in the Portal Server database only. Depending on how
a scheduled event is configured, they may be saved and written back to the VBrick
device after the scheduled event runs.
Multicast IP Destination multicast IP address.
Video Port Destination video port.
Audio Port MPEG-4 devices only. Destination audio port.
CC Port MPEG-4 devices only. Closed captioning port.