Valor Auto Companion Inc. 739DVN - Manual (Page 3)

3
Thank you for purchasing the Valor 739 Direct Vent insert. This high quality unit is specifi cally designed to
be used where installations are restricted by the size of the fi replace. It is our goal to satisfy every Valor
customer. This owner’s manual explains the steps required to safely assemble, install, operate, and maintain
your new appliance.
Options
The model 739 base unit is supplied equipped for use with either natural gas 739DVN or propane fuel
739DVP.
Appliance Styles
Standard metal front, black Kit #741SFB
Cast iron front, black Kit #742CFB
FenderFire Double Doors Front Kit #743FVI
FenderFire Single Door Front Kit #744FVI
Optional Outer Trims
3-sided Contour Trim Kit Kit #746
3-sided Deluxe Trim Kit Kit #747
4-sided Contour Trim Kit Kit #748
4-sided Deluxe Trim Kit Kit #749
Additional Optional Features
Circulating Fan Kit #755CFK
Variable speed and temperature control. It is designed to boost the natural convection process through the
appliance. It may be fi tted before the fi replace is installed or retrofi tted at a later date.
Natural Gas Conversion Kit #608NGK
For conversion from propane to natural gas. Intended primarily for post-installation conversion in areas
where natural gas was not available at the time of initial installation.
Venting Options
Direct Vent Installations
One or more of the accessories listed on page 30 must be used for each installation. See vent installation
section for details..
Introduction