Getting started, Setup, Setup of the vt20-2420 accessory handset – VTech VT2024-20 User Manual
Page 3: Installation of battery pack in handset
Setup
Registration And Operation Of The VTECH VT20-2420
Accessory Handset
Your VTECH 2-Line GIGAPHONE system can operate up to 8 Handsets.
The VTECH accessory Handset consists of the following:
Getting Started
4
5
Follow the steps below:
1.
Remove the battery cover by pressing
on the indent and sliding downward.
2.
Place the new battery pack in the
handset with the metal contacts
aligned with the charge contacts in
the battery compartment.
3.
Replace the battery cover by sliding
it upwards.
4.
If the new battery pack is not already
charged, place the handset in the
base unit, or a remote charging
stand, and allow it to charge for 12
hours. After initial charge, a
maintenance charge of 8 hours
should be sufficient.
Installation of Battery Pack in Handset
The original Handset that is shipped with you 2-Line GIGAPHONE system will be
automatically registered to the Base. This Handset is HANDSET 1.
As you register additional Handsets to the system, they will be assigned extension
numbers in the following order: HANDSET 2, HANDSET 3, HANDSET 4, and so forth.
Whenever a Handset battery pack is installed, the Handset will automatically begin
SEARCHING FOR BASE (if previously registered), or it will prompt you to ENTER
BASE ID to register the new Handset.
BEFORE USING YOUR HANDSET(S), CAREFULLY PEEL OFF THE PROTECTIVE
FILM, COVERING THE DISPLAY.
Setup Of The VT20-2420
Accessory Handset
1.
Plug the AC power adapter into an
electrical outlet.
2.
Remove the Handset battery cover
by pressing on the indent and sliding
downward.
3.
Place the new battery pack in the
Handset, with the metal contacts
aligned with the charge contacts in
the battery compartment.
4.
Replace the battery cover by sliding
it upward.
5.
Place the Handset in the Charge
Cradle, and allow it to charge for 12
hours. After the initial charge, a
maintenance charge of 8 hours
should be sufficient.
Handset
Battery Pack
Charger Unit
Belt Clip
FLASH
FLASH
CLEAR
HANDSFREE
VOLUME
INTERCOM/
GIGAPHONE
2.4GHz
TRANSFER
L1
1
2
ABC
DEF
MNO
JKL
TUV
GHI
PQRS
TONE
WXYZ
3
6
5
4
7
8
9
#
OPER
0
*
L2
OFF
1
5
3
FLASH
FLASH
CLEAR
HANDSFREE
VOLUME
INTERCOM/
GIGAPHONE
2.4GHz
TRANSFER
L1
1
2
ABC
DEF
MNO
JKL
TUV
GHI
PQRS
TONE
WXYZ
3
6
5
4
7
8
9
#
OPER
0
*
L2
OFF
1
3
2