Registration, The handset layout, Registration the handset layout – VTech VT2024-20 User Manual
Page 4: Enter base id code
6
7
Registration
The Handset Layout
1
2
3
4
5
6
7
8
9
10
13
11
12
14
16
15
FLASH
FLASH
CLEAR
HANDSFREE
VOLUME
INTERCOM/
GIGAPHONE
2.4GHz
TRANSFER
L1
1
2
ABC
DEF
MNO
JKL
TUV
GHI
PQRS
TONE
WXYZ
3
6
5
4
7
8
9
#
OPER
0
*
L2
OFF
1.
Antenna
2.
Message Waiting Indicator
3.
Earpiece
4.
Headset Jack (2.5mm)
5.
Scroll Keys
6.
Line 1 (Flash)
7.
Dialing Keys (0-9,*,#)
8.
Handsfree Speakerphone
9.
LCD Display
10.
Select/OK
11.
Off (Clear)
12.
Line 2 (Flash)
13.
Battery Compartment (back of
handset)
14.
Intercom/Transfer
15.
Volume
16.
Microphone
Enter Base ID Code
1.
After charging the Handset, remove it from its
Charge Cradle; the screen will display:
alternating with this screen:
2.
If, after charging the Handset, you see:
3.
Press NEW. You will now see the ENTER BASE
ID screen as described in step 1.
OK
7.
If the Handset displays REJECTED BY BASE or continues to display
SEARCHING FOR BASE for well beyond 60 seconds, try the registration process
again by repeating the above steps.
Congratulations! You can now enjoy the benefits of your 2-Line VTECH Multi-Handset
6.
Wait approximately 15 to 60 seconds. You
will hear confirmation beeps from the Base
and Handset. The newly registered Handset
will now assign itself the lowest handset
number not previously assigned to a different
system Handset (1 through 8).
MENU
4.
Find the BASE ID Code by doing the following: (the Base must be in idle (OFF)
mode)
A. At the Base, press MENU
B. Scroll down to DISPLAY BASE-ID
C. Press OK. The Base screen will display the 15-digit ID Code for approximately
30 seconds. Afterwards, it will return to the idle screen.
5.
Enter the 15-digit Base ID Code into the Handset; then press OK.
system.