Installation – Vanguard Heating VMH26TPC User Manual

Page 11

Advertising
background image

www.desatech.com

113111-01D

11

WARNING: Do not allow any

combustible/noncombustible

materials to overlap the firebox

front facing.

WARNING: Do not allow

noncombustible materials to

cover any necessary openings

like louvered slots.

WARNING: Never modify or

cover the louvered slots on the

front of the firebox.

WARNING: If pre-wiring, do

not connect wiring to any electri-

cal source at this time.
Install fireplace electrical outlet

and connect wiring to outlet

before connecting to electrical

source. The fireplace electri-

cal outlet is included with the

GA3450T blower accessory.
Only use the fireplace electri-

cal outlet supplied with the

GA3450TA blower accessory.

2. If installing GA3450TA blower accessory, do

so at this time. See Installing Blower Acces-

sory GA3450TA,

page 13.

Note:

If not installing blower accessory, you

may wish to run electrical wiring to your

fireplace for future blower installation (see

Accessories, page 30) Use only approved

three-wire electrical wiring.

Note:

A qualified installer should make all

electrical connections.

3. Install gas piping to fireplace location. This

installation includes an approved flexible gas

line (if allowed by local codes) after the equip-

ment shutoff valve. The flexible gas line must

be the last item installed on the gas piping.

4. If you have not assembled firebox, follow

instructions on page 4.

5. Carefully set fireplace in front of rough opening

with back of fireplace inside wall opening.

6. Attach flexible gas line to fireplace gas regula-

tor. See Connecting to Gas Supply, page 16.

7. Bend four nailing flanges on outer casing with

pliers (see Figure 10).

8. Attach fireplace to wall studs using nails

or wood screws through holes in nailing

flange.

9. Check all gas connections for leaks. See

Checking Gas Connections, page 18.

10. If using optional trim kit, install the trim after

final finishing and/or painting of wall. See

instructions included with trim accessory for

attaching trim.

IMPORTANT:

When finishing your firebox,

combustible materials

INSTALLATION

Continued

36

5

/

8

"

25

7

/

8

"

51

3

/

4

"

26

7

/

8

"

Figure 9 - Rough Opening for Installing

in Corner

26

7

/

8

"

26

7

/

8

"

3/4" Off
The Floor
Minimum

10

1

/

2

"

Figure 8 - Rough Opening for Installing

in Wall

Figure 10 - Attaching Fireplace to Wall

Studs

Nails or
Wood
Screws

Nailing
Flanges

Advertising
This manual is related to the following products: