VTech DS3211-2 - Manual (Page 13)

10
Telephone settings
Set voicemail
If you subscribe to voicemail service provided by your local telephone
company, this feature enables you to program your voicemail function codes
so you can easily access the voicemail features. Before completing these
steps, be sure to have your access number and password (provided by
your local telephone company) to access your voicemail. Contact your local
telephone company for more details about voicemail.
To program the voicemail function codes:
Press
PLAY
/MENU/
SELECT
to show the menu when the handset is not in use.
Press or to select > SET VOICEMAIL, then press
PLAY
/
MENU
/SELECT.
Press or to select one of the following options, then
press
PLAY
/
MENU
/SELECT.
ACCESS NUMBER
PASSWORD
PLAY
SKIP
ERASE
Use the dialing keys to enter the corresponding code for
ACCESS NUMBER, PASSWORD, PLAY, SKIP or ERASE.
Press
MUTE
/REMOVE to delete a digit.
Press and hold
MUTE
/REMOVE to delete the entire entry.
Press
PLAY
/
MENU
/SELECT to confirm.
To program a pause:
Press
PLAY
/MENU/
SELECT
to show the menu when the handset is not in use.
Press or to select > SET VOICEMAIL, then press
PLAY
/
MENU
/SELECT.
Press or to select >ACCESS NUMBER, then press
PLAY
/
MENU
/SELECT.
The blinking cursor should be at the end of your access number.
Press and hold
REDIAL
/PAUSE until a p appears.
Press
PLAY
/
MENU
/SELECT to confirm.
1.
2.
3.
•
•
•
•
•
4.
•
•
5.
1.
2.
3.
4.
5.
>SET VOICEMAIL
HOME AREA CODE
>ACCESS NUMBER
PASSWORD
A single pause is automatically programmed between the access number
and the password when you program your VOICEMAIL button so that your
voicemail service will recognize your password. Depending on your voicemail
service, you may need to program an extra pause between the access
number and your password.