VTech DS3211-2 - Manual (Page 16)

13
Telephone operation
Mute
The mute function enables you to hear the other party but
the other party cannot hear you.
During a call, press MUTE/
REMOVE
on the handset. The
handset screen shows MUTED for a few seconds and
MUTE appears until mute function is turned off.
Press MUTE/
REMOVE
again to resume the
conversation. The handset screen temporarily shows
MICROPHONE ON.
Ringer mute
When the telephone is ringing, press OFF/
CLEAR
or
MUTE/
REMOVE
to temporarily silence the ringer without
disconnecting the call. The next call rings normally.
Call waiting
If you subscribe to call waiting service from your telephone company, you
hear an alert tone if there is an incoming call while you are on another call.
Press
/FLASH
to put your current call on hold and take the new call. Press
/FLASH
at any time to switch back and forth between calls.
Find handset
Use this feature to page all system handsets.
Press FIND HANDSET on the telephone base. All idle handsets ring and
the screens show ** PAGING **.
To end paging, press
/FLASH
, , any dialing keys ( 0-9, #, *), or press
FIND HANDSET on the telephone base.
1.
2.
1.
2.
PHONE 0:00:00
MUTED
MUTE
RINGER MUTE