Vizio VP50 HDTV20A - Manual (Page 44)

VIZIO VP50 HDTV20A User Manual
Version 12/28/2007 44
www.VIZIO.com
4.4
DTV / TV Tuner Setup
When you first used your VP50 you will have setup your TV for DTV / TV channels using the Initial Setup
screens. If you did not do this or if your setup has changed, you can do this from the TV TUNER SETUP
menu.
4.4.1
Tuner Mode
When the MENU button is pressed, the On Screen
Display (OSD) appears on the PICTURE
adjustment page. Press the button to display
the TV page.
Press the button to highlight the Tuner Mode
selection.
Press the button to choose Cable or Air
(Antenna) depending upon which equipment you
have attached to the DTV / TV Input.
4.4.2
Auto Search
Press the button to highlight the Auto Search
selection.
Press the button to Auto Search for TV
channels available. The TV will automatically
search for analog and digital channels.
4.4.3
Skip Channel
After the TV has stored all of the available DTV channels in memory you will find that some channels will
be too weak to watch comfortably or they may be channels you do not want to see. Select the channel
you wish to remove.
Press the MENU and buttons to open the TV
TUNER SETUP menu.
Press the button to highlight SKIP CHANNEL.
Press the button to select this channel to be
skipped when using the CH+ or CH- button. You
will still be able to select this channel using the
number buttons on the remote control.
4.4.4
Digital Audio Out
Press the button to select this feature. The
options are Off, Dolby Digital and PCM. Press
the or button to select the desired output
when an external sound system is used.
Press either the MENU key to return to the previous menu display or the EXIT key to return to your
program if task has been completed