Preparing your plasma hdtv for wall mounting – Vizio VP50 HDTV20A User Manual
Page 6
VIZIO VP50 HDTV20A User Manual
Version 12/28/2007
6
www.VIZIO.com
Preparing Your Plasma HDTV for Wall Mounting
The VIZIO VP50 can either be kept on the stand base or mounted on the wall for viewing. If you choose
to mount the VP50 on the wall, please follow the instructions below for removing the stand base.
To remove the stand base
1. Unplug all of the cables and cords from your VP50
HDTV20A.
2. Place the VP50 HDTV20A face down on a soft and flat
surface (blanket, foam, cloth, etc) to prevent any
damage to the TV.
3. Remove the six (6) screws on each side of the back
panel of the VP50 HDTV20A located near the bottom
so that the stand base can be removed (see Figure A).
4. Gently pull the stand away from the VP50 HDTV20A
by grasping firmly on the base.
5. Now, the VP50 HDTV20A can firm securely to a
mount (sold separately) by utilizing the mounting holes
in the center of the back panel of the TV (see Figure
B). Please make sure to read the instructions of your
specific mount to properly hang the VP50 HDTV20A.
To find the perfect mount for the VIZIO VP50 HDTV20A, browse VIZIO’s certified mount selection at
or call directly 888-VIZIOCE (888-849-4623).