Vizio VP50 HDTV20A - Manual (Page 46)

VIZIO VP50 HDTV20A User Manual
Version 12/28/2007 46
www.VIZIO.com
4.5
DTV / TV Input Setup
4.5.1
Language
When the MENU button is pressed, the On Screen
Display (OSD) appears on the PICTURE
adjustment page. Press the button until the
SETUP page is displayed.
NOTE: Pressing the EXIT key either at any time
during or after completing a feature’s setup;
will take you out of On Screen Display menu. If
it is done during the setup, the changes will be
aborted and the feature will remain at the same
value or original condition in which it was
found.
Press the button to highlight the Language selection. The default is English.
Press the button to select Español or Français.
Press either the MENU key to return to the previous menu display or the EXIT key to return to your
program if task has been completed.
4.5.2
PIP (Picture-in-Picture)
Picture-in-Picture is a feature which allows you to watch two different signal inputs simultaneously, when
selected.
Press the button and highlight the option.
Press the button to activate the PIP feature, which will bring up a display showing Style.
Press either the or button to select it to be either PIP, POP or OFF.
Press either the MENU key to return to the previous menu display or the EXIT key to return to your
program if task has been completed.
If PIP is selected, then you will have the options of selecting the Input (Refer to PIP mode on page 60 of
this manual; for different combinations), Size (The size of the little box to watch the second signal) and
Position (Where you want to place the little box with the second signal).
If POP (Regularly called Picture-by-Picture) is selected, you will only have the option to select the Input
as the screen will display the two different signals side by side; each one occupying half of the screen.
Using the AUDIO key allows you to select which audio signal to listen to; either the audio signal of the
main screen or the audio signal of the sub-screen.
4.5.3
Sleep Timer
Press the button to highlight the Sleep Timer selection.
Press the button to select the timer to turn-off the TV in 30, 60, 90 or 120 minutes.
Press either the MENU key to return to the previous menu display or the EXIT key to return to your
program if task has been completed