3 operation – Vertex Standard HX760S User Manual

Page 34

Advertising
background image

HX760S

Page 34

g

VOLUME (+) Switch
Pressing this switch increase the receiver volume level.
Secondary use:
Press this switch while pressing and holding the PTT switch, to increases
the microphone gain of the BH-2.

h

PTT switch
Pressing this switch cause the HX760S to transmit. Release this switch to
return to receive the HX760S.

i

Speaker

j

Ear Hook
You can wear the BH-2 on your left or right ear. (see section “7.3.3 EAR
HOOK ORIENTATION
”).

7.3 OPERATION

7.3.1 WEARING THE BH-2
1. Open the Ear Hook.
2. Loop the Ear Hook over your ear.
3. Press the BH-2 to your ear.
4. Adjust the flexible boom microphone by

bending the boom towards your mouth.

For more comfort when wearing the BH-2, affix the sponge sup-
plied with the BH-2 on the speaker and insert the sponge ball
supplied with the BH-2 into the Ear Hook, and adjust as neces-
sary.

7.3.2 OPERATION
1. Press and hold the HX760S’s [POWER( )] key for two seconds to turn

the transceiver on. “ ” icon will blink on the display.

2. Press and hold the BH-2’s POWER( ) switch until the BH-2’s LED indica-

tor glows red, and the beeper sounds a high pitch tone (approximately
three seconds).

3. When the BH-2 is correctly recognized by the HX760S, the “ ” icon is

turned on continuously and the BH-2’s LED indicator blinks blue.

Advertising