Vinotemp VT-38 - Manual (Page 8)

W W W . V I N O T E M P . C O M
CORD INSTRUCTIONS
For your protection, this unit is equipped with
a 3-conductor cord set that has a molded 3-
prong grounding-type plug, and should be
used in combination with a properly
connected grounding-type outlet as shown in
figure A.
It is not recommended to use this cooler with
an extension cord or power board. Please
ensure that the appliance is plugged directly
into the electrical outlet.
COOLER INSTALLATION
1. This cooler is designed to be built-in (fully recessed) or free standing.
2. Remove all exterior and interior packaging.
3. Place your cooler on a flat surface that is strong enough to support
the unit when fully loaded.
4. Do not place the unit in a moist place or display in direct sunlight.
5. Do not place heavy objects on top of the unit.
6. Do not place the unit next to a major appliance that emits large
amounts of heat, such as a dishwasher, microwave, oven, etc.
7. Unit is not designed for installation in a garage or basement.
8. Before connecting the appliance to the power source, let it stand
upright for approximately 24 hours. This will reduce the possibility of
a malfunction in the cooling system due to handing during
transportation.
9. Clean the interior surface with lukewarm water using a soft cloth
before first use. Be sure to wipe dry.
10. Do not plug unit into the same outlet as a refrigerator or microwave.