Verizon Wireless Intelligent Mobile Hotspot MiFi 2200 - Manual (Page 22)

21
Set Up the Software
Set up the software (Windows)
➊ ➊ Turn on MiFi 2200. [See Power MiFi 2200 On and Off
(page 19).
] Be sure both LEDs are green.
IMPORTANT Both LEDs must be green for the software to detect the device correctly.
➊ ➋ Launch VZAccess
SM
Manager.
The VZAccess
SM
Manager window opens.
Tip!
If the device is not fully turned on (both LEDs green) when you launch the software, a “A wireless
device was not detected!” message opens. Turn the device on, then click OK, ensure the device type
is set to Auto Detect, and then click Start to detect the device.
➊ ➌ Click Connect WWAN.